ADVANCED OUTDOOR KITCHEN SINK KIT
INSTALLATION INSTRUCTIONS
Step one – Installing the Feisty Warthog Adaptor:
Remove the old adaptor and pipe from the kitchen sink plug (and throw it in the bin!).
Wrap thread tape clockwise around the sink plug thread 4 times (try to cover at least 2 cm of the sink plug thread).
Screw on the Feisty Warthog sink adaptor (be careful not to overtighten).
Step two – Installing the Feisty Warthog Plate:
Fit the Feisty Warthog plate to the hot and cold outlet plate (be sure to align the holes).
Insert the tab through the holes until it clicks in place.
Step three - Connecting the Adaptor to the Plate:
Cut a 1m length off your sullage pipe.
Attach the two female camlock fittings to both ends of the 1m sullage hose (put the sullage pipe in a cup of hot water to make it easier to push on).
Connect the sullage pipe to the sink adaptor and to the plate.
Step four – Connecting the Plate to the grey water tank outlet:
Attach your remaining sullage hose to the back end of the plate (again, use hot water on the sullage pipe to help).
Run the pipe under the caravan to the grey water tank outlet. Run the sullage pipe on top of the white PVC pipe to keep the sullage pipe from bowing. Secure with cable ties. The last cable tie should be just after the grey water valve itself.
Step four – Connecting the Plate to the grey water tank outlet:
Attach your remaining sullage hose to the back end of the plate (again, use hot water on the sullage pipe to help).
Run the pipe under the caravan to the grey water tank outlet. Run the sullage pipe on top of the white PVC pipe to keep the sullage pipe from bowing. Secure with cable ties. The last cable tie should be just after the grey water valve itself.